TRS Parts

KEIHIN Trial S3 Carb adjusters KitReference: BL-610-XComposition:• Aluminium screws• Stainless steel springsFeatures:•Micrometric adjustment• Suita...

Keihin Float Bowl Drain Plug O-Ring

Keihin Float Bowl o-ring

Keihin 28 PWK Float Pin

Keihin PWK 28 Float Valve Clip

Keihin Idle Adjuster Spring PWK28

The Jitsie Keihin carburetor idle screw replaces the standard plastic idle screw and makes it possible to adjust there idle without the need for a ...

Keihin PWK 28 Idle Screw Kit

Genuine Keihin Hex Main Jet PWKMain Jet Sizes:105110115 118120122125128130132135138140142145148150152

Main jet to set up the mixture throughout the full throttle range and especially at full throttle.Features:* suitable for (Keihin) PWK 28mm carbure...

Genuine Keihin Pilot Jet PWK (Slow Jet)Pilot Jet Sizes:35384042454850 52555860

Keihin Pilot Jet (Slow Jet) Jitsie

KEIHIN PWK 28 carburetor. Supplied with 42 pilot jet, 118 main jetIf you need other size jets you will have to purchase them separately.The connect...

JITSIE KEIHIN PWK 28 CARBURETOR REBUILD KIT Photo is stock Keihin Image Comes with allen bolts instead of the phillips head screws

Keihin #N350-03A00Kit includes float bowl/o-ring/bowl cap/fuel pipe exit/idle jet/2x screws

Keihin PWK 28 Float Bowl Trün Larger CapacityComes with float bowl and float bowl bolt*does not come with float bowl o-ring or float bowl bolt o-ri...

Keihin PWK Carburetor needle JJH JJJ JJGJJKAll come with clipProvides the precise fuel metering between 1/4 and 3/4 throttle openings.

Keihin PWK 28 Needle Jet Holder

Keihin PWK 28 Throttle Spring Collar

Keihin PWK 28mm Needle ClipKeihin #N16115-169-0040

Keihin PWK Choke Assembly

Keihin PWK Float Keihin #W1310-080-9901

Keihin PWK 28 Float Bowl Screw x2 Jitsie

Keihin PWK 28 Float Needle Valve

Keihin PWK Top Cap

Keihin PWK Top Cap Screw x2 Jitsie

Keihin PWK Top Cap with AdjusterKeihin #1030-843-2200

KEIHIN PWK 28 carburetor. Supplied with 38 pilot jet, 135 main jet, needle JJH, slide 3,5.If you need other size jets you will have to purchase the...

Throttle valve 3.5 (Std) PWK28 Keihin #N502-52H00

Keihin Top Cap Cover Gasket PWK 28mm

Transparent Keihin carburetor tubes to replace the original ones.Features:* kit includes 2 transparent tubes of 10cm and 27cm long* 4x7mm* tighter ...

GasGas Pro Kickstart Oil Seal GAS GAS TXT PRO KICKSTART SHAFT SEAL 24MM OD 18MM ID 4MM THICK FITS ALL GAS GAS PRO MODELS 2002 TO 2023Also Fits TRS

The LRP Better Tether is a high quality replacement kill tether for trials bikes. With its focus on durability, this tether is ready for any obstac...

The LRP Better Tether is a high quality replacement kill tether for trials bikes. With its focus on durability, this tether is ready for any obstac...

The LRP Better Tether is a high quality replacement kill tether for trials bikes. With its focus on durability, this tether is ready for any obstac...

Replacement flexible lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* flexible lanyard with Jitsie branding* 25cm long strap (measured ...

Replacement flexible lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* flexible lanyard with Jitsie branding* 25cm long strap (measured ...

Replacement flexible lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* flexible lanyard with Jitsie branding* 25cm long strap (measured ...

Replacement rigid (non elastic) lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (m...

Replacement rigid lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (measured flat)*...

Replacement rigid (non elastic) lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (m...

Replacement rigid (non elastic) lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (m...

Part # MAG LANYARD MAGNETNever a bad idea to have a spare magnetic lanyard with you while riding. Features:* flexible lanyard with Jitsie branding*...

Never a bad idea to have a spare lanyard with magnet in your rucksack when you go riding. Features:* flexible lanyard with Jitsie branding* works w...

Part # KILL MAG LNYRDThe Jitsie kill button with magnet is a must have safety item for every trials riders. The magnetic top part of the kill butto...

The Leonelli kill button with magnet is a must have safety item for every trials rider. The magnetic top part of the kill button is attached to the...

Universal kill button that works with any type of trials bike. Just connect the wires and mount the button on the handlebar and you're good to go.F...

The Jitsie lever adjuster is a really handy aftermarket part. Just replace the standard nut and bolt on the master cylinder with the adjuster and a...