Suspension

Aftermarket spring for Reiger shock absorbers. Features:* high quality chrome-silicon wire* titanium color for a factory look* does not fit the Rei...

Rear Shock Spring Reiger OEM138mm-70kg (155lbs) or 138mm-75kg (165lbs)

Aftermarket spring for Sachs shock absorbers. Features:* high quality chrome-silicon wire* titanium color for a factory lookColor: Titanium Type: S...

Left hand side delta linkage plate anodised in gold.Fits:Sherco from 2012 onwardsScorpa from 2015 onwards

Right hand side delta linkage plate anodised in gold.Fits:Sherco from 2012 onwardsScorpa from 2015 onwards

Sherco Large Dog Bone Linkage BearingSize, 16mm Inner dia by 18mm Outer dia by 15mm long, DU style.Rear suspension linkage uses 2 of these bearing,...

Top hat bushing to fit in the bearing on the large end of the dog bone linkage of the rear suspension.Fits all Shercos.Sherco Part Number C171Two b...

Bushing to fit in the bearing on the small end of the dog bone linkage of the rear suspension.Fits all Shercos.2 x bushings required per bike, bush...

OEM 120 mm long M10 bolt that is found in the lowest hole in the delta link on the Sherco/Scorpa rear suspension.

MAIN FEATURES- Extremly strong and lightweight, with shapes designed to avoid contact with obstacles- The 7075 T6 3mm thick made shelter for Sherco...

MAIN FEATURES - Extremely strong and lightweight, with shapes designed to avoid contact with obstacles - The 7075 T6 3mm thick made shelter fo...

Sherco Small Dog Bone Linkage BearingSize, 14mm Inner dia by 16mm Outer dia. by 15mm long - DU style.Rear suspension linkage uses 2 of these bearin...

The swingarm bearing kit is the most complete kit available on the market! Each kit contains all of the bearings, shafts, seals and bushings requir...

Large aluminum nut used to secure the top yoke on the triple clamp of the front forks.ThreadM18 x 1.0mmSherco 01-20

Made of 7075 T6 Ergal aluminum alloy and 2024 aluminum alloy. Designed to give increased strength to the delta link and improved reliability for yo...

Set of shock absorber wrenches to easily adjust the pre-load of a shock absorber without damaging the spanner rings.Features:* laser cut tool for g...

Tech 39mm Lower Fork Bushing Left

Tech 39mm Lower Fork Bushing Right

Bike: Gas Gas Raga/Racing/Factory 12-18, Jotagas 2012/14-15, Montesa 4RT/RR 14-18, Ossa Factory 2014, Sherco 11-22, TRS One 16-18, Vertigo Combat 1...

Bike: Gas Gas Raga/Racing/Factory 12-24, Jotagas 2012/14-15, Montesa 4RT/RR 14-24, Ossa   Factory 2014, Sherco 11-24, TRS One 16-24, Vertigo Combat...

39mm Tech Fork Cap Right GoldSherco OEM Part # 3665

The stanchions in natural anodized aluminum with Ø39 black Tech logo make it precise and in harmony with all the trial framesTech Fork Leg Aluminum...

The Ø39 natural anodized aluminum stanchions make it precise and in harmony with all trial frames.Tech Fork Leg Aluminum "Gold" Coating 39mmLeft or...

Tech Fork Leg Kashima Coating 39mmLeft or Right Inner Fork LegSold as one leg only(If you need both sides, purchase qty 2)Does not come with the bo...

Tech Forks Service KitF231003Works with all Tech 39mm Forks

Compression Kit for the Tech Suspension front forks.The compression damping adjuster fits in the bottom of the damping tube, it has a needle valve ...

The Ø39 natural anodized aluminum stanchions make it precise and in harmony with all trial frames.Tech Fork Leg Aluminum "Gold" Coating 39mmLeft In...

The Jitsie upper fork tube in aluminium for the Tech 39mm aluminium front fork is a great alternative to the original tube while adding a factory l...

The Ø39 natural anodized aluminum stanchions make it precise and in harmony with all trial frames.Tech Fork Leg Aluminum "Gold" Coating 39mmRight I...

The Jitsie upper fork tube in aluminium for the Tech 39mm aluminium front fork is a great alternative to the original tube while adding a factory l...

Tech - Lower Drain Bolt - Right LegGroup Lock Screw Hydraulic PumpFits Alloy & Steel ForksTech-Sherco# 3674Scorpa# 3674GasGas# BT201753012 or B...

Color: BlackSize: RightType: Steel