Sherco Parts

Sherco Fuel Cap Hose Holder7253Link for Nut Click Here

Sherco Fuel Cap Hose Holder Nut#7256Link to Fuel Cap Hose Holder

Rear mounted fuel tank for the 2010 Sherco trials bikes2273

Petrol tank for the 2016-2022 Sherco trials bikes.Part# 5946

Fuel Tank Breather Nipple to fit the 2010 to 2015 Sherco trials bikes.The nipple has a M5 thread on it.Part# 2274

Sherco Fuel Tank S240 for the 2001 to 2005 Sherco trials bikes.Non PaintedFuel tap needed for this tank Fuel Tap Click Here

Sherco Fuel Tank XL 2006-2009Sherco Tank 2006 to 2009 Comes with decal, petcock, and fuel cap

Sherco Gear Clutch Shaft M374

Indexer used to hold the gear selector drum in the correct place. The roller pivot can wear allowing the body to contact the index which makes it d...

The gear indexer that fastens to the selector drum, used to select and hold the bike in gear.M105

Sherco/Scorpa Gear Pinion 5 M061

Sherco/Scorpa Gear Shift Pawl Index Spring M117Sherco 99-22Scorpa 10-22

Sherco Gear Shift Selector Shaft with Pawl AssemblyM107Sherco 1999- on Scorpa 2010- on

Sherco/Scorpa  M113  

Sherco Handlebar OXIA OEM 5512

Sherco Headlight Cover Black2011-3163

Sherco Headlight Cover Blue2357

Sherco Headlight Decal 99 BultacoS103

Sherco Headlight Lens 99-00 BultacoLens OnlyS100

Sherco/Bultaco Headlight Shroud 99 with DecalC060 New Old Stock Only 1 Left

2003 Sherco Headlight Shroud with DecalC243 & C444

Black plastic flywheel cover To fit the 2011-2022 Sherco Trials bikes

Sherco Inner Head O-Ring M039

Sherco Inner Rear Wheel Spacer5931

Sherco Lateral Stand S131

Sherco M281 Kickstand Bolt

Oil Seal 17 x 24 x 5 to fit the kickstart shaft on the 2011-2021 Sherco Trials bikes Sherco 3128

Kickstart oil sealSizesID 17mmOD 28mmWidth 5mmFits all Shercos 99-2010Sherco part number M170

Thin shim washer 17x25x1As used either side of the kick-start pinion gear on the Sherco trials bikes.This washer can get worn causing the kick star...

Sherco Kickstart Spring M156

Sherco Kids 50cc Rear Hub Assembly C552Discontinued part last one

Sherco Large Dog Bone Linkage BearingSize, 16mm Inner dia by 18mm Outer dia by 15mm long, DU style.Rear suspension linkage uses 2 of these bearing,...

The linkage bearing kit is the most complete kit available on the market! Each kit contains all of the bearings, shafts, seals and bushings require...

Top hat bushing to fit in the bearing on the large end of the dog bone linkage of the rear suspension.Fits all Shercos.Sherco Part Number C171Two b...

Bushing to fit in the bearing on the small end of the dog bone linkage of the rear suspension.Fits all Shercos.2 x bushings required per bike, bush...

SHERCO: NEW LONG RIDE FUEL TANK KIT FOR THE SHERCO TRIALS MODELSGo on longer excursions thanks to the new LONG RIDE KIT developed for the Sherco tr...

Sherco Long Range Tank/Seat Petrol Tap 7180  

Sherco Long Range Tank/Seat Rear Mount 8578

OEM 120 mm long M10 bolt that is found in the lowest hole in the delta link on the Sherco/Scorpa rear suspension.

2016-2022 Sherco bottom half of Air BoxPart Number 5952

Sherco Lower Triple Clamp Graphite 39mm Tech 4557

As used on the Sherco and EM on the top shock bolt also used on the Gas Cap Fuel Hose Holder ID: M10 (10.7mm)OD: 19.6mmThickness: 2mmM315

Sherco gearbox sprocket shaftM054

Inlet manifold gasket as fitted on the 2015 Sherco Factory Trials bike.It can be fitted to the older 2011 onwards bikes to help seal the inlet mani...

Caged needle roller bearing 17x21x10As used on the Sherco kick start pinion gear.DimensionsInner Diameter 17mmOuter Diameter 21mmWidth 10mm

Sherco Oil Fill Cap O-ringM162

Sherco Oil Fill Cap Magnetic 8374

Sherco Outer Head O-Ring M038