Sherco Parts

Keihin Intake and Carb Plugs Very handy covers to plug the intake for maintenance and cleaning and also the back side of the carb. The 2 covers sna...

Genuine Keihin Hex Main Jet PWKMain Jet Sizes:105110115 118120122125128130132135138140142145148150152

Main jet to set up the mixture throughout the full throttle range and especially at full throttle.Features:* suitable for (Keihin) PWK 28mm carbure...

The small brass tube that sticks out in to the main bore of the carb, the needle moves in and out of this jet making it bigger or smaller, as a coi...

Jitsie # CY20-PWK-16012-240A Keihin #16164-169-0040

Genuine Keihin Pilot Jet PWK (Slow Jet)Pilot Jet Sizes:35384042454850 52555860

Keihin Pilot Jet (Slow Jet) Jitsie

KEIHIN PWK 28 carburetor. Supplied with 42 pilot jet, 118 main jetIf you need other size jets you will have to purchase them separately.The connect...

JITSIE KEIHIN PWK 28 CARBURETOR REBUILD KIT Photo is stock Keihin Image Comes with allen bolts instead of the phillips head screws

Keihin #N350-03A00Kit includes float bowl/o-ring/bowl cap/fuel pipe exit/idle jet/2x screws

Keihin PWK 28 Float Bowl Trün Larger Capacity Comes with float bowl and float bowl bolt  

Keihin PWK Carburetor needle JJH JJJ JJGJJKAll come with clipProvides the precise fuel metering between 1/4 and 3/4 throttle openings.

Keihin PWK 28 Needle Jet Holder

Keihin PWK 28 Throttle Spring Collar

Keihin PWK 28mm Needle ClipKeihin #N16115-169-0040

Keihin PWK Choke Assembly

Keihin PWK Float Keihin #W1310-080-9901

Keihin PWK 28 Float Bowl Screw x2 Jitsie

Keihin PWK 28 Float Needle Valve

Keihin PWK Top Cap

The Jitsie Allen bolts for Keihin PWK 28mm carburettors replace the original cover and float bowl screws, which often get damaged or stripped after...

Keihin PWK Top Cap Screw x2 Jitsie

Keihin PWK Top Cap with AdjusterKeihin #1030-843-2200

KEIHIN PWK 28 carburetor. Supplied with 38 pilot jet, 135 main jet, needle JJH, slide 3,5.If you need other size jets you will have to purchase the...

Throttle valve 3.5 (Std) PWK28 Keihin #N502-52H00

Keihin Top Cap Cover Gasket PWK 28mm

Transparent Keihin carburetor tubes to replace the original ones.Features:* kit includes 2 transparent tubes of 10cm and 27cm long* 4x7mm* tighter ...

Kickstand Special Bolt Sherco/ScorpaC166

Sherco 2016-2022Scorpa 2015-2022 Kickstart Bushing#6056

The compression spring found in the kick start assembly.Part# M155Sherco 1999-upScorpa 2010-up

Kickstart Free Ratchet Sherco/Scorpa 23-26 8329

Sherco/Scorpa Kickstart Free Ratchet Free Ratchet KickstartUsed on:Sherco 1999-2022Scorpa 2010-2022 Part# M152

Sherco kickstart pinion gear as used on the 2014 > 2015 Factory 5395

Sherco Kickstart Idle Gear M153

Sherco/Scorpa Kickstart ShaftPart# 8588

Kickstart Shaft Sherco/Scorpa 23-26 8330

OEM Sherco/Scorpa Kickstarter 13-22 4539

Kickstarter Sherco/Scorpa 23-26 11772 This is the updated kickstarter over the 2023 models

The Jitsie kickstart lever for Scorpa and Sherco bikes up to 2022 is a complete, high-quality replacement for the original lever. Manufactured from...

Replacement flexible lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* flexible lanyard with Jitsie branding* 25cm long strap (measured ...

Replacement flexible lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* flexible lanyard with Jitsie branding* 25cm long strap (measured ...

Replacement rigid (non elastic) lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (m...

Replacement rigid lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (measured flat)*...

Replacement rigid (non elastic) lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (m...

Replacement rigid (non elastic) lanyard for Leonelli/Jitsie magnetic kill buttons.Features:* rigid lanyard with Jitsie branding* 25cm long strap (m...