Engine

Piston Sherco/Scorpa 125 "A"Sherco 2014-2019Scorpa 2015-20194908Comes supplied with new Piston, Rings, wrist pin and Piston C-Clips.

Clutch pressure plate that sits on the outside of the clutch friction plates.Fits:Sherco trials bikes 2017 to 2022Scorpa 2017 to 2022Incorrectly li...

Radiator Cap Fits Beta Rev, GasGas Pre-2013, and others Does NOT Fit BETA TECHNO See Pictures to match with your Radiator cap

MAIN FEATURES- Thread: M 14 x 1.5- CNC machined- Made of Ergal 7075 T6 aluminum alloy MODELGasGas .../'22, Jotagas, Scorpa, Sherco, TRS

Sherco Radiator Fill Cap O-Ring14x2M168Sherco Kickstart O ring to fit in between the swivel joint and the lever.Sherco Radiator Filler Cap Seal - 2...

Sherco 2010-upScorpa 2010- upRadiator Fill Cap4558

Radiator Pressure Relief Valve Washer Sherco Part # 2860 Fits GasGas, Sherco, and Scorpa

Pressure Relief Valve Radiator with WasherThread: M8x0.75Hex head: 9mm Fits:Sherco Trials Bikes 2010 up Scorpa Trials Bikes 2010 up GasGas Pro 2013...

Beta Rev/Evo Reed Valve Gasket 16.92550.000 Sherco 1999-2010 M041

Rubber grommet / silent block used for:Sherco - Silent-Bloc Radiator 1999>2013 bikes.Sherco - Rubber grommet around the top of the air filter ca...

MAIN FEATURES- Extremely strong against cracks and rubbings- A racing parts for great aesthetic impact- Super stiffness to improve clutch control e...

New smaller cylinder head O-ring for the 125cc Sherco trials bike from 2012 onwards.The 2011 Sherco parts book is showing the 125 using this oring,...

Sherco Part# 1171Thickness .2mmThe base gaskets are available in different thicknesses to allow the correct squish clearance to be achieved. The st...

Sherco Part# 1172Thickness .3mmThe base gaskets are available in different thicknesses to allow the correct squish clearance to be achieved. The st...

Sherco Part# 1173 Thickness .4mmThe base gaskets are available in different thicknesses to allow the correct squish clearance to be achieved. The s...

Sherco Cylinder Base Gasket.Fits: 125 and 200 Shercos from: 2011 to 2013 The base gaskets are available in different thicknesses to allow the corr...

Sherco Cylinder Base Gasket M037Fits 250cc - 1999 to 2010290cc - 1999 to 2005 (some of the late 2005 bikes used the wider gasket - M681)

Sherco Part# M681The base gaskets are available in different thicknesses to allow the correct squish clearance to be achieved.Some bikes come with ...

M6 x 60mm - Socket Cap Head Allen ScrewM257

Rubber inlet manifold to connect the air box to the carburettor on Sherco trials bikes between 2006 and 2009 and older 80, 125, 200'sLength: 40mmLa...

Standard External C-clip DIN 471To fit shafts: 17mmClip ID: 15.7mmFits Sherco: Retains kickstart idle gear on mainshaft (M054)

New old stock Clutch Basket  M357 4430

Grey (anthracite)  Outer clutch inspection cover to fit the  Sherco trials bikes from 2011-2022 Part# 8395

Sherco Clutch Cover 11-22 Silver 3131

MAIN FEATURES- Extremely strong against cracks and rubbings- A racing parts for great aesthetic impact- Super stiffness to improve clutch control e...

Sherco Clutch Cover 23- 8301

Sherco Clutch Case Cover.Sherco part number M383Fits all Shercos from 1999 to 2008Painted with Metallic Silver colored paint.

Clutch case cover to fit Shercos from 1999 to 2010Supersedes: M383 (Silver)Part# 2013

Sherco Clutch Cover O-Ring 99-10M045

Full CNC reinforced clutch cover made by S3 Clutch cover for Sherco Scorpa Trial Bikes Keep safe your clutch cover, with full CNC reinforced cover....

Sherco Clutch Case Gasket.Sherco part number M036Fits:Sherco Trials bikes 1999 to 2010Scorpa Trials bikes 2010 to 2013

Sherco & Scorpa Clutch Hub 17-22 6348

Sherco Clutch Hub 4100 As fitted on:Sherco 2012 Cabes to 2016.Scorpa 2015 to 2016Can also be used in replacement for the older hub (M083) without t...

Sherco Clutch Spring M092 99-16 Sold individual 

Coolant hose to fit above or below the in-line thermostat.Sherco 1562, C130

M8 x 40mm - Socket Cap Head Allen Screw - 8.8 - ZincUse: Sherco 1 x cylinder frame mount

Sherco Cylinder Head O Ring Bolt6 o-rings required for cylinder head (Sold individually)Sherco part number M040Fits all Sherco trials bikes

Sherco Cylinder Support 2.5/2.9 20102251

A neat engine protector to help prevent water and mud splashing up onto the engine and clogging up around the cylinder. 2006 - 2007

A neat engine protector to help prevent water and mud splashing up onto the engine and clogging up around the cylinder. 2011 -2013

O-Ring to fit the flywheel ignition cover on a Sherco trials bike from 1999 to 2010, plus newer 80cc Shercos.Sherco Part number M034  Now New Part ...

Sherco Free Pinion 2 EME There are 2 versions of this gear, this one has 35 teeth so please double check.  M056

Sherco/Scorpa Free Pinion 4 M063