Suspension

The MONTESA swingarm bearing kit is the most complete kit available on the market! Each kit contains all of the bearings, shafts, seals and bushing...

Montesa Top Triple Clamp 39mm 5323A-NN3-8300 OEM New old stock

Yokes Aluminum Set   These stylish, all aluminum triple clamps are a direct replacement for the original yoke. Developed and tested by our riders...

The o-ring to fit the separate aluminum piece that holds the fork seals in place on the older Paioli front suspension forks.Fits:1999 to 2000 Sherc...

Paioli Lower Left Fork Leg Fits: 97-99 Montesa 315r, Beta Techno 96-99, GasGas 94-95 or any older trials bike  with the Paioli 38mm Forks.  

Rear shock bearing used on Montesa, Scorpa, Sherco and TRS trials bikes.Features:* suitable for the Ollé/R16V shock absorber on the Montesa 4RT, Sc...

Showa rear shock bearing.Features:* suitable for the Showa shock absorber on the Montesa 315/4RT Also OEM Honda Available * equals or exceeds origi...

Rear shock absorber bearing.Characteristics:* suitable for standard Beta Evo / Gas Gas / TRS shock* meets or exceeds original qualityBeta OEM #007....

Aftermarket spring for Ohlins shock absorbers. Features:* high quality chrome-silicon wire* titanium color for a factory lookWhich one to choose? *...

Aftermarket spring for Sachs shock absorbers. Features:* high quality chrome-silicon wire* titanium color for a factory lookColor: Titanium Type: S...

Aftermarket spring for Showa shock absorbers. Features:* high quality chrome-silicon wire* titanium color for a factory lookWhich one to choose? * ...

TJ3 GP Montesa 4rt 05-24 Also fits directly on the Montesa 315r 97-04 THE HIGHEST PERFORMANCE For the most expert and demanding pilots, for ...

The TRP trials shock absorber is a great upgrade for any trials rider to obtain a better suspension setup as it allows for a wide range of adjustme...

Set of shock absorber wrenches to easily adjust the pre-load of a shock absorber without damaging the spanner rings.Features:* laser cut tool for g...

Showa 39mm Fork Leg Works Original left or Right Showa front fork 39mm for Montesa 315R - Cota 4RT.  Original Showa product

Tech 39mm Lower Fork Bushing Left

Tech 39mm Lower Fork Bushing Right

Bike: Gas Gas Raga/Racing/Factory 12-18, Jotagas 2012/14-15, Montesa 4RT/RR 14-18, Ossa Factory 2014, Sherco 11-22, TRS One 16-18, Vertigo Combat 1...

Bike: Gas Gas Raga/Racing/Factory 12-24, Jotagas 2012/14-15, Montesa 4RT/RR 14-24, Ossa   Factory 2014, Sherco 11-24, TRS One 16-24, Vertigo Combat...

39mm Tech Fork Cap Right GoldSherco OEM Part # 3665

The stanchions in natural anodized aluminum with Ø39 black Tech logo make it precise and in harmony with all the trial framesTech Fork Leg Aluminum...

The Ø39 natural anodized aluminum stanchions make it precise and in harmony with all trial frames.Tech Fork Leg Aluminum "Gold" Coating 39mmLeft or...

Tech Fork Leg Kashima Coating 39mmLeft or Right Inner Fork LegSold as one leg only(If you need both sides, purchase qty 2)Does not come with the bo...

Tech Forks Service KitF231003Works with all Tech 39mm Forks

Compression Kit for the Tech Suspension front forks.The compression damping adjuster fits in the bottom of the damping tube, it has a needle valve ...

The Ø39 natural anodized aluminum stanchions make it precise and in harmony with all trial frames.Tech Fork Leg Aluminum "Gold" Coating 39mmLeft In...

The Jitsie upper fork tube in aluminium for the Tech 39mm aluminium front fork is a great alternative to the original tube while adding a factory l...

The Ø39 natural anodized aluminum stanchions make it precise and in harmony with all trial frames.Tech Fork Leg Aluminum "Gold" Coating 39mmRight I...

The Jitsie upper fork tube in aluminium for the Tech 39mm aluminium front fork is a great alternative to the original tube while adding a factory l...

Tech - Lower Drain Bolt - Right LegGroup Lock Screw Hydraulic PumpFits Alloy & Steel ForksTech-Sherco# 3674Scorpa# 3674GasGas# BT201753012 or B...

Color: BlackSize: RightType: Steel